Balloons
Below are list of our most common Toppers.
Place your orders via the Toppers Work Order.
If you have another style you wish to have manufactured please request a custom proposal.

TB-011 Box Pleated Balloon
- Made with inverted box pleats
- Spaced approximately 10” to 14” apart, unless specified differently
- Bottom of valance has a weight bar
- Wrapped returns: Yes
- State only the long OR short point on the work order
- Available with contrast pleats

TB-017 Water Fall Balloon
- Machine gathered at top creating a waterfall effect
- Poufs are spaced approximately 12” to 14” apart
- Bottom of valance has a weight bar
- Wrapped returns: Yes
- State only the long OR short point on the work order

TB-018 Water Fall Balloon with Tails
- Machine gathered at top creating a waterfall effect
- Poufs are spaced approximately 12” to 14” apart
- Tail length is about 6” to 8” longer than the long point of the valance body
- Wrapped returns: Yes
- State only the long OR short point on the work order
**Caution: when mounting over outside mount blinds, the tails can interfere with operation of the blind

TB-013 Wide Balloon with Center Tuck
- Made with inverted box pleats
- Spaces about 22” to 26” apart
- Center of each space has a small inverted pleat
- Wrapped returns: Yes
- State only the long OR short point on the work order
- Available with contrast pleats

TB-070 London Valance
- Inverted Pleats set in on ends
- MAXIMUM width 45” for one droop
- Has 3 to 4 permanent bottom folds that are made to form a center droop and tails.
- Wrapped returns: Yes
**Caution: When mounting over outside mount blinds, the tails can interfere with operation of the blind