We can manufacture many styles. Download our “Toppers Quick Reference” for other ideas and styles here.
General Information:
- Cornice box is made from solid wood
- Dust cap is constructed from ¾” pine board in stock lumber sizes, custom sizes available
- Cornice face is constructed of 3/8″ – 7/16″ plywood or waffle board
- Cornices are constructed from the OUTSIDE
- If the inside measurement is critical (as inside mounting over trim), add a minimum of 2″ to the trim to trim
- Returns are specified INSIDE of the box
- Cornices for Bays and Corner windows are made in pieces and assembled at installation
- One piece corners or bays are available, request a Custom proposal
- Thin, see-thru and silk fabrics recommend adding an under liner. Sur-charges will apply
- Railroading fabric is recommended whenever possible in order to avoid visible seams on the cornice face
- Most cornice styles can be made to fit corner and bay windows
Features
- Fabric edges & staples on back covered with gimp
- Cornice face and returns are padded with 1” Dacron padding
- Workroom will deduct 1” from the ordered face width on inside and wall to wall mounted cornices
- Dust cap (top) is covered with white lining
- Patterns are matched (when possible) with seams balanced on each side of the cornice face
- Inside is lined with thermal suede white or ivory lining. Specify your preference on the work order. If nothing is specified, workroom will choose white
- All cornices include a 3/8” welt cord along the bottom edge
- Inside returns are self-lined with either face fabric or welting fabric
Add-ons Available
- Banding
- Buttons/Similar Items
- Cascades
- Fringe
- Panels
- Jabots
- Pre-cording
- Pre-trims
- Rosettes/Knots/Bows
- Ruffles
- Swags- Open Top
- Ties
- Welts
Order Information Required:
Use Work Order Form #6 – Cornices, or include all of the following information below. Download the form, and fax to 303-722-8815, or email to info@precisiondrapery.com.
- Quantity
- Room/Location
- Style number
- Face width outside/inside
- Return sizes
- Finished Length (Long Point)
- Medium Point (if applicable)
- Short Point (if applicable)
- Fabrication Style, Upright (Seamed), Railroad (when applicable)
- Inside or Outside mount
- Welt size and positions
- Can see top of dust cap (Yes/No)
- Add-ons (if any)
- Special Instructions
- Fabric: Vendor, Pattern, Color, Width. Repeat
- Workroom Details (if any)
- Installation Placement (attach additional pages if needed)